Characteristics of a fiber laser marking machine
1, the processing effect is good, will not damage the workpiece itself, no wear;
2, the laser beam is fine, low loss, small processing heat;
3, the use of computer software control, automatic processing and production, can realize the production line, improve the processing efficiency.
4, different materials can be processed for the workpiece, such as metal materials, non-metallic materials, etc.. In the processing of high hardness, high melting point and other brittle materials, its advantages are more prominent.
Two, optical fiber laser marking machine unique advantages
1, the use of all air cooling technology, response to global industrialization, energy saving and environmental protection, no water or electric heating refrigeration;
2, the laser volume is small, the whole air cooling, fiber output, easy to install and easy to operate;
3, laser beam quality, high conversion rate, heat dissipation, low loss of technical advantages;
4, the feedback device can effectively prevent the isolator, the light is reflected back to the processing of materials, to avoid damage to the laser generator;
5, integrated photoelectric conversion rate, save cost, improve the processing efficiency;
6, highly adapted to the operating environment, even in poor environment, such as temperature, humidity, shock and other complex environment can also be normal processing.
Three, fiber laser marking machine and other processing of the processing of the comparison chart
As the optical fiber laser marking machine and other processing equipment, fiber laser marking machine is applicable to the material is also very wide, can achieve high precision machining requirements, especially in: battery, consumer electronics, solar energy, automotive electronics, other hardware components, etc..
Advantages and installation of optical fiber laser marking machine:
One, the advantages of fiber laser marking machine:
1, fiber laser marking machine of the resonant cavity without optical lens, free adjustment, maintenance free, high stability
2, can easily be competent for a variety of multi-dimensional and arbitrary spatial processing applications
3, the dust, shock, shock, humidity, temperature has a high degree of tolerance
4, the overall efficiency of the electro-optical efficiency of 20% or more, a large margin of power consumption, saving running costs
Two, the optical fiber laser marking machine installation should pay attention to:
1, the installation, the main consideration is the main part of the metal plate and solid processing parts, machining parts, spring washer and washer between the mechanical connection, in order to increase the course of the two things, when necessary, to ensure that there is no vibration loosening of the screws.
2, the installation of the main considerations, including the following several parts, red calibration must be completely accurate optical path, the module height must be the same height of the red light focus must adjust the oscillation of the two times the most appropriate position, of course, red light Kong Yingxiao some good, when the first piece is very good to adjust the mirror, half mirror frame lock, can not move.